PHP essentials

From Joomla! Documentation

Revision as of 16:47, 8 January 2009 by B.mainak (Talk | contribs)

This Article Needs Your Help

This article is tagged because it NEEDS REVIEW. You can help the Joomla! Documentation Wiki by contributing to it.
More pages that need help similar to this one are here. NOTE-If you feel the need is satistified, please remove this notice.

PHP essentials

Many web designers and casual website owners are not conversant with the PHP language in which Joomla! is written and since Joomla! templates usually contain PHP statements it is necessary to understand at least a little of the language in order to be able to create or customize templates. This chunk will describe, in simple terms, how to use each aspect of PHP in the context of a Joomla! template. For example, a simple explanation of the PHP if-then-else syntax using extracts from a template for illustration.

The best resource to learn PHP is probably hands on experience and Joomla can provide that to you thanks to it's native PHP code. This can be overwhelming for people who have not programmed before. Though Joomla is easy enough to install with the help of the community and a little of your time you'll have people asking you to do their websites.

One place that has a nice short list if functions and examples is which is good to get familiar with PHP. Though for an extensive function list, explanations, and examples go to

Once you have the basics of PHP you'll need to get the basics of the Joomla PHP syntax. Start by looking at some existing extensions and check out the code and also take a look at some these Tutorials about Joomla:

How to create a Joomla! Plugin

Developing a Model-View-Controller Component - Part 1

Developing a Model-View-Controller Component - Part 2 - Adding a Model

Developing a Model-View-Controller Component - Part 3 - Using the Database

Developing a Model-View-Controller Component - Part 4 - Creating an Administrator Interface

That will help you get familiar with some of the functions available within Joomla's system and what they do (using the API). Take particular care to understand the MVC (model view control) setup.

If however, you are absolutely new to PHP, following may help as very brief introduction to PHP.

PHP Introduction

PHP is a scripting language and is designed primarily for producing dynamic web pages. It is in general embedded into a HTML page with tags like <?php ... ?>. When such a page is passed on to the PHP engine, the engine translates the PHP tags into HTML and which can then be rendered by a browser. Further during translation the script may require to pull data from a database and thus a database is needed. So for creating PHP pages we require in general, the PHP engine, a database typically MySQL and finally the webserver which will co-ordinate these actions and forward the final HTML to the browser. These 3 components can be installed separately, however, for convenience we have packages like WAMP for windows, MAMP for mac and LAMP for Linux. Installing the packages is discussed next.

PHP Installation

The packages can be downloaded from WAMP. WAMP stands for Windows Apache MySQL PHP. The instructions can be followed as given in the site and is pretty straightforward. The installation can be done is any directory (say D:/wamp). Once installed, it can be started from the program->start->WampServer. This should give a small icon in the system tray using which the server can be started/stopped/restarted. It also gives links to all important files like php.ini and other configuration files. For Mac users MAMP can be found here. For the purpose of this tutorial XAMPP can also be used.

PHP Round trip

Our primary target here is to write a small PHP page and get it rendered by the Apache web server. To render a page WAMP by default looks into the www folder of the WAMP install directory referred henceforth as WAMP_HOME for convenience. Fire up your primary text editor and create a page say first.php and save it in the WAMP_HOME/www/x/y folder, where x, y are folders (which you can create for organizing your scripts). Write the following in the script

   <title>Basic PHP Page</title>
echo ("My first php snippet");

Save this file and point your browser to http://localhost/x/y/first.php and you should be able to see the echo message.

Primary things to note here are

1. It is strongly advised to start any PHP code by "<?php" and end with a "?>" tag. 
2. To have a semicolon after each PHP statement.
3. The directory in which this script resides needs to be given in the URL. 

This completes our round trip. Now for the sake of learning either you can keep including new elements in this file or may create separate scripts and load them in the browser.

PHP Variable declaration and Data types

For any programming we need to hold data. In PHP following are the ways in which you can define variables.

  1. $variable_name = 0;

    Note here we did not define what is the type of variable, whether integer or string that the variable should hold. This is referred to as dynamic scoping.

  2. the variable names should start with an alphabet and can contain alphanumeric characters and "_"
  3. Defining constants -
     define ("NAME_OF_THE_CONSTANT" , $value);

Basic operators

The general operators are as below and explained.

a.      +   e.g. 6 + 3, addition operator, answer is 5
b.      –   e.g. 6 - 3, subtraction operator, answer is 3
c.      /   e.g. 6 / 3, division operator, answer is 2
d.      *   e.g. 6 * 3, multiplication operator, answer is 18
e.      %   e.g. 6 % 3, modulus operator, answer is 0
f.      .   e.g. '6'.'3', concatenation operator, gives string '63'
g.      +=   e.g. $x += 6, adds 6
h.      -=   e.g. $x -= 6, subtracts 6
i.      /=   e.g. $x /= 6, divides by 6
j.      %=   e.g. $x %= 6, modulus by 6
k.      .=   e.g. $x .= '6', concats 6 to x
l.      <   e.g. $x < $y, evaluates to true if $x is < $y
m.      >   e.g. $x > $y, evaluates to true if $x is > $y
n.      ==  e.g. $x == $y, evaluates to true if $x is equal by value to $y
o.      !=  e.g. $x != $y, evaluates to true if $x is not equal to $y
p.      ===   e.g. $x === $y, evaluates to true if $x is and $y is identical i.e both of same type both value and reference
q.      >=  e.g. $x >= $y, evaluates to true if $x is >= $y
r.      <=  e.g. $x <= $y, evaluates to true if $x is <= $y
s.      &&  e.g. ($x == 2 && $y == 3) , evaluates to true if $x equals 2 and $y equals 3
t.      ||  e.g. ($x == 2 || $y == 3) , evaluates to true if either $x equals 2 or $y equals 3
u.      xor e.g. ($x == 2 xor $y == 3) , evaluates to true if either $x equals 2 or $y equals 3 but not both
v.      ++  e.g. $x++, increments $x
w.      –-  e.g. $x--, decrements $x

Defining array Structures

Ways of declaring arrays
Suppose we want many variables, we could have done in the way declaring variables as above, however, that is not elegant, for suppose u want a 100 variables; declaring arrays come to the rescue. Note that index in PHP starts from 0.

$my_guitar_heroes = array ("Hendrix", "Schenker", "Gilmour", "to_name_a_few!");

$my_guitar_heroes [] = "Hendrix";
$my_guitar_heroes [] = "Schenker";
$my_guitar_heroes [] = "Gilmour";
Here PHP automatically assigns the index.

$my_guitar_heroes [0] = "Hendrix";
$my_guitar_heroes [10000] = "Mainak";
Here in I just knew the first element and the 10000th element and thats me!

a combination of the above means

$my_guitar_heroes  = array_fill( 1, 9999, "to be decided" ); // set element 1 to 9999 as "to be decided"

'''Accessing the arrays''' 
print $my_guitar_heroes[2]; //Access the 2nd element

$my_guitar_heroes[count($my_guitar_heroes)-1]; //Access the last but one element

end($my_guitar_heroes); //The last element.

'''Iterating over the element of an array''' 
foreach ( $my_guitar_heroes as $temp) {
  print "$temp<br />";

Control expressions

To execute a statement of collection of statements over and over, we use Control expressions. The following are general syntax of the control structures

if statements

if( $x > 0) {	
 print("$x is positive");
}  else if( $x < 0 ) {	
 print("$x is negative");
} else {
 print("$x is 0");

for loop

for ( $x=1; $x<= 10; $x++ ) {
 print "$x<BR/>";

while loop

$x = 1
while ( $x <= 10 ) {
 print "$x<BR/>";

do while loop

$x = 1;
do {
 print "$x<BR/>";
}while($x <= 10);

Defining functions

Code which is duplicated at many places are best placed in a function. Following are the ways of describing the function.

function name_of_the_function( $arguments, $size='default_values_if_any' ) {
  print "here goes in the code"; 
  return "this value is returned, return statement is optional";

The arguments are passed by value. If they are to be passed by reference then an argument is prefixed by "&" as below

function name_of_the_function( &$arguments, $size='default_values_if_any' ) {
  print "here goes in the code"; 
  return "this value is returned, return statement is optional";

Scope of a variables defined within a function is valid within the function only.

Calling a function

$x = add(5, 3);


Basic printing options
A basic way to debug is to print the value of the variable. The following basic statments acheives that

  • echo "if double quotes are used then dollar variables are resolved";
  • echo 'if single quote are used then dollar variables are not resolved';
  • print "another way to print";
  • nl2br("any new line characters like \n get automatically resolved to HTML line breaks");

Apart from these the log files are very helpful and can be found in the WAMP_HOME/logs directory.

Handling forms

PHP does not change any HTML structure, thus any syntax of HTML remains the same. The part that PHP plays is making any part dynamic for e.g the action attribute of a form can be coded as action=<?php my_own_action(); ?> so that it is dynamically generated. The part where PHP kicks in is after the form is submitted, to say obtain the values of the form fields, set cookies etc. For this super global variables are used which are always available to PHP code. Some of these are

  1. $_GET - get the data from a GET request
  2. $_POST - get the data from a POST request
  3. $_REQUEST - get the request
  4. $_COOKIE - obtain the cookies from the browser
  5. $_SESSION - obtain the session

All of these are arrays and behave accordingly.